Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Przewodnik Instalacji Pobierz pdf (Strona 93)

SMC Elite32 (8033)

Solaris Device Driver:

smce

Device Type:

Network (Ethernet)

Adapter:

SMC Elite32 (8033)

Bus Type:

EISA

Connectors:

One board type has an AUI connector and two

BNC connectors.

Another board type has an AUI connector and

two RJ-45 connectors.

Channel 0 can use any of the connectors.

Channel 1 can use only a BNC or an RJ-45

connector, not an AUI connector.

Conﬁguration Procedure

1. Use the EISA conﬁguration utility (ECU) to select the connector for channel 0.

Note - If a transceiver is connected to the AUI connector, the board uses the AUI

connection even if another connector type is selected in the ECU.

2. Set the IRQ level if needed.

In the Elite32 ECU, the system usually determines the IRQ value automatically by

using the ﬁrst available IRQ level the ECU ﬁnds. If there are also ISA adapters

not identiﬁed in the ECU, the automatically chosen IRQ may conﬂict with an ISA

adapter IRQ. System performance or network adapter communication may be

affected. You can override the automatic assignment of the IRQ by manually

selecting an unused IRQ level for the Elite32 adapter.

Device Reference Pages 81

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 126 127

Brak uwag

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Przewodnik Instalacji Strona 93