
Compaq SMART Array Controller
Solaris Device Driver:
csa
Device Type:
Disk Array
Adapter:
Compaq SMART Array Controller
Bus Type:
EISA
Systems Supported:
Internal and external SCSI drives on the Compaq
family of ProSignia, and ProLiant, and Systempro
servers
Preconfiguration Information
The SMART controller only supports SCSI disk drives. SCSI tape drives and
CD-ROM drives are not supported.
The boot device must be logical drive 0 on the primary controller. Even though the
BIOS lets you configure any controller as the primary controller, it will only let
you boot from logical drive 0 on that controller.
Known Problems and Limitations
If you want to change the RAID configuration, first delete the old configuration
information using the EISA configuration utility. If you physically move the disks
before deleting the RAID configuration (or the partition information on the logical
drives), you may not be able to boot your system.
44
Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998
Komentarze do niniejszej Instrukcji