
DPT PM-2012B HBA
Solaris Device Driver:
dpt
Device Type:
SCSI
Adapter:
DPT PM-2012B
Bus Type:
EISA
Preconfiguration Information
Supported Settings
• IRQ Level: Any legal value between 9 and 15
(edge-triggered interrupts)
• I/O Address:
zC88 (where z is a slot number from 1 to 7)
• Option ROM Address: Default
• WD1003: Emulation off for drives 0 and 1
Known Problems and Limitations
If you have used the DPTFMT utility correctly and the board is properly seated in
your machine, failure to display disk geometry may indicate a defective board.
To prevent system hangs caused by improper IDE emulation, the version number
of the EISA configuration utility (ECU) that contains the !DPTA401.CFG file
should not be before 6B3. If it is, obtain a newer version from your vendor and
rerun the ECU.
Configuration Procedure
1. Boot DOS from the diskette drive.
2. Insert a copy of the DPT Utility diskette in the diskette drive.
32
Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998
Komentarze do niniejszej Instrukcji