Adaptec 2100S - SCSI RAID Controller Podręcznik Użytkownika Pobierz pdf (Strona 37)

2-26

Storage Manager on ROM

Array Operations

This section describes how to use SMOR to create arrays and

multilevel RAIDs, delete arrays, assign hot spare drives, and rebuild

an array.

Creating an Array

To create an array, follow these steps:

1 Select RAID > Create. The RAID Type window appears as

shown in Figure 2-15.

Figure 2-15. RAID Type Window

2 When the RAID Type window appears, select the RAID level

you want to use. The default stripe size is selected

automatically; however you can select a different stripe size

value by highlighting the field and using the up and down

arrow keys to change the stripe size.

Note: Although you can change the stripe size, Adaptec

recommends using the default value, which has been

selected for optimum performance based on the type of disk

array you chose to create.

RAIDtype:

( ) RAID0 (Nofault tolerance)

( ) RAID1 (Fault tolerance,Higher performance

( ) RAID5 (Fault tolerance,Higher capacity)

Stripesize: 16

Can

cel

Def

ault

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 134 135

Brak uwag

Adaptec 2100S - SCSI RAID Controller Podręcznik Użytkownika Strona 37