Adaptec 2200S - SCSI RAID Controller Przewodnik Instalacji Pobierz pdf (Strona 34)

3-3

Installing the Driver

A Note About CD Support

If the CD-ROM reader device is attached to the controller card

included as part of this kit, the controller BIOS will need to be

configured to allow the CD reader to work. To configure the card

for this use, follow these steps:

While the system is starting, press Ctrl-A when the controller

card displays its message on the screen.

When the first SCSI Select Utility window appears, select the

option SCSI Select Utility.

Click Controller Configuration.

Use the arrow keys on your keyboard to position the cursor

over CD-ROM Boot Support, then Removable Media Devices

Support. Make both lines Enabled, if they aren’t already.

Press Esc until the Reboot window appears. Allow the system

to restart.

Creating the Driver Disk from the Bootable CD

These instructions cover creation of disks for Windows, Novell,

SCO Unix, and Linux. To create a driver disk:

Ensure your system BIOS is ready to boot from the CD-ROM

drive. See your system documentation if you need help. Insert

the CD that came with the controller, and start your system

from the CD. Follow instructions and respond to prompts as

necessary to get to the Adaptec Main Menu.

From the Main Menu, select Create Driver Disk(s). . .

Review the type of installation you are doing elsewhere in this

chapter to know what type of driver disk to create. Click on the

type of driver disk desired, then click OK.

When the screen prompts you to insert a disk and click OK, do

so. The system will format the disk, insert a file system, if

needed, and write the appropriate information onto it. When

finished, the screen will display another OK button.

Remove the driver disk and click OK. Label the disk to

represent the driver disk created.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 66 67

Brak uwag

Adaptec 2200S - SCSI RAID Controller Przewodnik Instalacji Strona 34