Adaptec 1542CP - Storage Controller Fast SCSI 10 MBps Podręcznik Użytkownika Pobierz pdf (Strona 54)

100

101

A-63054 February 2004 3A-29

Mode Setup The default image address format for each mode in Capture Software matches

the factory setting of the mode defined in the scanner. As a result, you should

only need to make changes in Capture Software if mode changes were made

in your scanner through the KODAK Scanner Mode Setup Software.

To make changes to your mode setting in Capture Software, do the following:

1. Select a Mode from the drop-down list of 18 mode numbers.

2. Enter an optional mode Name that will be displayed in Capture Software

whenever you are selecting a mode to be downloaded to the scanner.

3. Enter the Image address length for each of the image address fields.

The lengths of the image address fields must match the image address

format as defined in the scanner. To assist you in determining what the

lengths should be, click on the Read from scanner button. This will adjust,

if necessary, the image address lengths to match the lengths as defined in

the scanner.

NOTES: The total of all of the image address lengths must not exceed

12 characters.

A length of “0” means that the image address field is not used or it is

not applicable for the selected mode.

Read from scanner is operational only for the Scanner 5500 and

Scanner 7500/7520.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 411 412

Komentarze do niniejszej Instrukcji

Brak uwag

Adaptec 1542CP - Storage Controller Fast SCSI 10 MBps Podręcznik Użytkownika Strona 54

Komentarze do niniejszej Instrukcji