Adaptec 6405 Podręcznik Użytkownika Strona 54
- Strona / 110
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
4. Assuming the USB drive is assigned to /dev/sda1, type the following commands to begin loading
the driver:
mkdir /AACRAID
mount /dev/sda1 /mnt
cp -R /mnt/* /AACRAID
umount /mnt
Note: The following steps assume you are installing Ubuntu 10 or 11, using kernel
2.6.32-28. For Ubuntu 12 or higher, the driver les aacraid.ko-PRE_MOD and
aacraid.ko-POST_MOD are both replaced by the single le aacraid.ko.
5. Copy the driver le to the /lib/modules directory:
cp -f /AACRAID/aacraid.ko-PRE_MOD
/lib/modules/2.6.32-28-generic/kernel/drivers/scsi/aacraid/aacraid.ko
6. Remove the USB drive.
7. Install the loadable module:
insmod /lib/modules/2.6.32-28-generic/kernel/drivers/scsi/aacraid/aacraid.ko
8. Press CTRL+ALT+F1 to switch back to the installation screen, then follow the on-screen prompts
to continue the installation.
Note: Do not press Continue at the end of the installation until you complete Step
9!
9. When prompted to reboot the system, press CTRL+ALT+F2 to switch to the console.
10. Type the following commands to complete the driver installation:
Ubuntu 32-bit:
cp -f /AACRAID/aacraid.ko-POST_MOD
/target/lib/modules/2.6.32-28-generic-pae/kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.32-28-generic-pae
update-initramfs -u -v
exit
Ubuntu 64-bit:
cp -f /AACRAID/aacraid.ko-POST_MOD
/target/lib/modules/2.6.32-28-server/kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target /sbin/depmod -a 2.6.32-28-server
update-initramfs -u -v
exit
11. Press CTRL+ALT+F1 to switch back to the installation screen, then reboot.
12. Continue with Managing Your Storage Space on page 64.
Installing with Solaris
Note: This task is not necessary if you are installing Solaris 10 Update 2 or later.
Instead, you can choose to install Solaris using the in-box driver and update it either
during or after the installation is complete, if required.
Note: If necessary, you can create a driver disk by burning a CD with the
aac_solaris-x86.iso le, available on the Adaptec Installation DVD.
To install the Adaptec RAID controller driver while installing Solaris:
1. Start your computer.
54Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00277-02-A Rev. A, Issue:
Serial Attached SCSI RAID Controllers Installation and User's Guide
- Serial Attached SCSI RAID 1
- Controllers Installation 1
- Revision History 3
- Contents 4
- 1 About This Guide 14
- Kit Contents 16
- System Requirements 16
- 3 About Your RAID Controller 17
- Adding a Flash Backup Module 18
- About the Adaptec RAID 6405 19
- About the Adaptec RAID 6445 20
- About the Adaptec RAID 6405E 22
- About the Adaptec RAID 6405T 24
- About the Adaptec RAID 71605E 28
- About the Adaptec RAID 71685 29
- About the Adaptec RAID 72405 30
- 4 Getting Started 31
- Front of board 33
- Full-height bracket 33
- Installation Options 34
- Basic Installation Steps 34
- Before You Begin 36
- Installing the Controller 36
- Recessed side 38
- Connecting External Devices 42
- Next Steps 43
- 6 Creating a Bootable Array 44
- Making Your Array Bootable 47
- Creating a Driver Disk 48
- Installing with Windows 50
- Installing with Debian Linux 52
- Installing with Ubuntu Linux 53
- Installing with Solaris 54
- Installing with FreeBSD 55
- Installing on Windows 59
- Installing on Debian Linux 60
- Installing on Ubuntu Linux 60
- Installing on Solaris 61
- Installing on FreeBSD 61
- Installing on VMware 62
- 4. Reboot your computer 63
- 9 Managing Your Storage Space 64
- Which Utility Should I Use? 65
- 10 Solving Problems 66
- Resetting the Controller 68
- A Introduction to SAS 69
- What’s a Phy? 70
- What’s a SAS Port? 70
- What’s a SAS Address? 70
- What’s a SAS Connector? 71
- What do SAS Cables Look Like? 71
- Backplane Connections 72
- SAS Expander Connections 72
- B Understanding RAID 74
- RAID 1 Arrays 75
- RAID 1 Enhanced Arrays 75
- RAID 10 Arrays 76
- RAID 5 Arrays 77
- RAID 5EE Arrays 78
- RAID 50 Arrays 79
- RAID 6 Arrays 80
- RAID 60 Arrays 80
- Comparing RAID Levels 81
- Ctrl-A or uEFI/HII? 82
- Running the ARC Utility 82
- Creating a New Array 83
- Managing Existing Arrays 83
- Creating Bootable Arrays 83
- Modifying Cache Settings 84
- Stopping a Secure Erase 85
- Creating and Managing JBODs 86
- Creating a New JBOD 86
- Managing Existing JBODs 86
- Managing the maxCache Pool 86
- Applying Changes and Exiting 87
- General Controller Settings 87
- Locating Disk Drives 89
- Identifying Disk Drives 90
- Viewing the Event Log 90
- Running the Menu-based AFU 92
- Specication 102
- F Safety Information 104
- G Technical Specications 105
- PMC-Sierra, Inc 110
- 1380 Bordeaux Drive 110
- Sunnyvale, CA 94089 USA 110
Powiązane produkty i podręczniki dla Kontrolery RAID Adaptec 6405
(4 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji