Adaptec 6405 Podręcznik Użytkownika Pobierz pdf (Strona 42)

1. Install the SSDs in your server. For servers with a standard 2.5-inch drive tray, install the SSD directly

into the tray. If your server does not have a standard 2.5-inch drive tray, use a bracket or adapter

which enables it to t properly.

Use a 2.5” to 3.5” adapter to

install your SSD if server does

not have 2.5” tray.

Typical SSD installation

2. Use an internal mini-SAS or mini-SAS HD to SATA cable, as required, to attach the SSD(s) to the

controller, as shown in the example below.

To other SSDs

SSD connected to controller with

internal mini-SAS HD to SATA Fanout cable

Single-port connectorInternal x4 mini-SAS HD connector

3. When all SSDs have been installed and connected, close your computer cabinet, reattach the power

cord, then continue with Connecting External Devices on page 42.

Connecting External Devices

Note: If you are not connecting any external devices, see the following section, Next

Steps on page 43.

42Proprietary and Condential to PMC-Sierra, Inc.

Document No.: CDP-00277-02-A Rev. A, Issue:

Serial Attached SCSI RAID Controllers Installation and User's Guide

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 109 110

Brak uwag

Adaptec 6405 Podręcznik Użytkownika Strona 42