Adaptec APA-1350 Przewodnik Instalacji Pobierz pdf (Strona 16)

ASI Hardware Installation Guide

In the back of your computer, locate the slot where the SCSI card has been installed. You

should see the card we just installed sticking out the back.

Take one end of the SCSI cable (that comes with your ASI package) and plug it into the card

that was installed. Tighten the screws so that the cable is firmly connected to the card.

Below is a picture of the back of the DVD player.

Plug the end of the SCSI cable into the TOP port of the DVD player. (The other end of the

cable is connected to the card you installed in your computer.)

Included in the DVD package there is a small gray connector, called a “terminator”. Put the

terminator on the BOTTOM port of the DVD player.

Plug the power cable into back of the DVD player, and turn the DVD player on.

Plug the power cable back into your computer, and turn your computer on. (If you had to

disconnect any other cables to install the SCSI card, you should reattach those cables at this

time.)

When you turn your computer on, your Windows-based machine will detect the card and install

the appropriate drivers automatically.

At this point, your computer may ask you for the Windows disc. The computer needs to copy

the SCSI card drivers from the CD-ROM onto your hard drive. If you have a CD-ROM drive that

is currently installed and functioning (perhaps an internal player that is built into your computer),

put the Windows disc into the drive. If you do not have a functional CD-ROM player, or you do

not have a Windows disc available, you have been sent a floppy diskette that contains the

drivers necessary to complete the installation. Place the diskette into you’re A: drive, and when

Windows asks for the CD-ROM, choose the A: drive.

Once you are back into Windows, you can make sure your 2930 driver software has been

installed properly.

From the desktop, click on Start, then Settings, then Control Panel.

In the Control Panel window, click on System.

Click on the Device Manager tab.

Click on the plus sign located to the left of SCSI Controllers.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

Brak uwag

Adaptec APA-1350 Przewodnik Instalacji Strona 16