Adaptec 1742A Instrukcja Użytkownika Pobierz pdf (Strona 3)

 once they have been lost. To record the bootstrap settings, from

 the ’setup menu’ select the ’manage boot selection menu’ then

 select ’dump boot selections’. This displays all the bootstrap

 selections on one screen. Record this display.

 Alternatively for the NT console, you can use the following to

 record each boot selection individually. From the ’boot selections

 menu’ select ’change a boot selection’, then on ’selection to

edit’, use the up arrow keys to scroll through the boot selections.

Hit carriage return when you have the required boot selection, eg.,

 "Windows NT Version 3.1", and it will then display all the boot

 variables for that boot selection. Copy this screen down and then

 use the "ESC" key to exit. Repeat for all the boot selections.

 This is very tedious, but it may save you or the customer rebuilding

 NT because you cannot determine what the bootstrap should be at the

 end of the FCO.



+---------------------------+ |

| d | i | g | i | t | a | l | |

+---------------------------+ |

_________________________________|______________________________________

o - Preparing to remove the Adaptec 1742A FRU.

Use ALL ESD safety precautions to prevent DOA’s on material in kit.

************************** C A U T I O N ***************************

* The module, as with all modules, contain electrostatic discharge *

* sensitive devices (ESDS). The use of the Velostat Kit or ESD *

* module box is essential to prevent damage which may not be *

* noticed immediately. *

********************************************************************

Setting up the Velostat Kit

___________________________

1. Unfold the Velostat mat to full size (24" x 24").

2. Attach the 15 foot ground cord to the Velostat snap fastener

on the mat.

3. Attach the alligator clip end of the ground cord to a good

ground on the cabinet.

4. Attach the wrist strap to either wrist and the alligator clip

to a convenient portion of the mat.

5. When working on a module, use part of the mat as a work area.

 OR:

************************ C A U T I O N *****************************

* If using a module in an ESD box, insure wrist strap is connected *

* to the box and the box is connected to chassis of the device *

Adaptec 1742A Instrukcja Użytkownika Strona 3