Adaptec AMM-1510M Przewodnik Instalacji Pobierz pdf (Strona 7)

AMM-1525M/1510M/525M Installation Guide

Part Number: 510659-00, Rev. A

Print Spec Number: 492931-00

Current Date: 9/19/94 ECN Date: 9/27/94

to The aspi2dos ASPI Manager of the Adaptec EZ-SCSI

User’s Guide.

To change the SCSI ID on your SCSI device, refer to

your SCSI device documentation.

Connecting IDE Devices

(AMM-1525M/525M Only)

IDE devices (standard IDE hard disk drives and/or

ATAPI CD-ROM drives) are connected to the host

adapter by a 40-pin IDE ribbon cable with a 40-pin

header connector.

The 40-pin IDE ribbon cable included in your kit has

connectors at each end. One end of the cable is

attached to the 40-pin IDE connector on the host

adapter, and the other end is attached to an IDE

device. To connect a second IDE device, obtain a

40-pin IDE ribbon cable with a middle connector.

Note: If you are using the IDE controller on

the AMM-1525M/525M as the only IDE con-

troller in your computer, you must disable

any existing IDE controller; see your com-

puter’s documentation.

To connect IDE devices, follow these steps:

1 Set the first IDE device as the master device and

the second (if any) as the slave device. See your

IDE device documentation for details.

2 Attach the connector at one end of the 40-pin IDE

ribbon cable to the AMM-1525M/525M IDE con-

nector. Make sure to align pin 1 of the cable with

pin 1 of the connectors on the host adapter and

IDE device.

Note: On ribbon cables, pin 1 is usually

marked with a contrasting color on one edge

of the cable; a small arrow, a delta symbol

(

▲), or a “1” usually marks pin 1 on the IDE

connector.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Adaptec AMM-1510M Przewodnik Instalacji Strona 7