
1
The Adaptec SCSI Card 29160LP Ultra160 SCSI controller
enables you to connect up to 15 SCSI devices—such as hard disk
drives, scanners, and CD-ROM drives—to any Intel-based
computer with 32-bit or 64-bit PCI expansion slots. You can
connect newer Ultra160 and Ultra2 SCSI devices to the two 68-
pin Low Voltage Differential/Single-Ended (LVD/SE) connectors.
This installation guide explains how to:
•
Install the Adaptec SCSI Card 29160LP
•
Set up SCSI devices
•
Connect SCSI devices
•
Install Adaptec SCSI Card driver software
I
NTRODUCTION
If you connect singled-ended devices along with
Ultra160 or Ultra2 SCSI devices, the data transfer speed of
the Ultra160 or Ultra2 SCSI devices drops to the slower sin-
gle-ended transfer rate. Although the Adaptec SCSI Card
29160LP is a 64-bit PCI card, it also works in a 32-bit PCI slot.
When installed in a 32-bit PCI slot, the card automatically
runs in the slower 32-bit mode.
C
AUTION
68-pin Internal LVD/SE
68-pin External VHDCI LVD/SE
connector
connector
29160LPRevA.fm Page 1 Tuesday, May 2, 2000 4:04 PM
Komentarze do niniejszej Instrukcji