Adaptec ASA-7211C/F Przewodnik Instalacji Pobierz pdf (Strona 42)

A-4

ASA-7211C/F Installation Guide

Updating the Driver in Windows NT 4.0

This section describes the following procedures:

■ Removing the Old Driver

■ Adding the New Driver

Removing the Old Driver

To update the driver, you must first remove the driver. To remove

the driver:

1 Open the Windows Control Panel.

2 Double-click SCSI Adapters.

3 Click the Drivers tab.

4 Choose the appropriate driver from the list box.

Click the controller identified as an

Adaptec Storage Accelerator 7211

6 Click Remove and follow all Windows instructions. Windows

will prompt you to reboot the computer.

Adding the New Driver

To add the new driver:

1 Insert the disk containing the new driver.

2 Open the Windows Control Panel.

3 Double-click SCSI Adapters.

4 Click the Drivers tab.

5 Click Add, and then click Have Disk.

6 Click Browse and browse to the appropriate location on the

driver disk.

7 Click Open, and then click OK.

8 Click Adaptec Storage Accelerator 7211 (NT 4.0).

9 Click OK and follow all Windows instructions. Windows will

prompt you to reboot the computer.

ASA-7211 IG.book Page 4 Monday, February 2, 2004 10:33 AM

1 2 ... 37 38 39 40 41 42 43 44 45

Brak uwag

Adaptec ASA-7211C/F Przewodnik Instalacji Strona 42