Adaptec 9210LP Dokumentacja Pobierz pdf (Strona 20)

Adaptec Fibre Card 9210LP User’s Reference

The following three options have no effect when the FC Card BIOS is

disabled. (The FC Card BIOS is normally Disabled by default.)

■ FC card Hard AL_PA—(Default: 0x01) Each port in an FC

Arbitrated Loop is assigned an Arbitrated Loop Physical

Address (AL_PA). FC card will claim selected AL_PA during

initialization. Lower AL_PA will have a higher priority.

■ Devices scanning—(Default: Backward) Choose FC device

scanning order.

■ Backward—When selected, FC Card will scan the devices

starting from the last valid AL_PA (0xEF) until the first valid

AL_PA (0x01).

■ Forward—When selected, FC Card will scan the devices

starting from the first valid AL_PA (0x01) until the last valid

AL_PA (0xEF).

■ Host Adapter Speed—(Default: 1 Gigabit) Determines the

maximum data transfer rate that the FC Card supports. The

Adaptec Fibre Card 9210LP can perform at 1 Gigabit or

2 Gigabit speeds, or Auto Negotiation, with the default setting

at 1 Gigabit. To operate at full potential in a 2 Gigabit SAN,

change the Host Adapter speed to 2 Gigabit.

FCSelect Settings

The following settings display information about FC Card:

■ Tachyon Chip—Indentifies Tachyon chip present on FC Card.

■ World Wide Name—Displays World Wide Name for FC Card,

a unique identifier within Fibre Channel domain.

■ Interrupt (IRQ) Channel—Displays the IRQ channel used by

FC Card.

■ BIOS Segment Address—Displays BIOS Segment Address of

FC BIOS.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Brak uwag

Adaptec 9210LP Dokumentacja Strona 20