Adaptec 29160LP - SCSI Card Storage Controller U160 160 MBps Przewodnik Instalacji Pobierz pdf (Strona 10)

Adaptec SCSI Card 29160 User’s Reference

■

Termination on non-Ultra160 and Ultra2 internal SCSI devices

usually is controlled by manually setting a jumper or a switch

on the device, or by physically removing or installing one or

more resistor modules on the device.

■

Termination on most external SCSI devices is controlled by

installing or removing a SCSI terminator. However, termina-

tion on some external SCSI devices is enabled or disabled by

setting a switch on the back of the SCSI device.

■

The last external Ultra160 or Ultra2 SCSI device must be termi-

nated with an LVD/SE (low voltage differential/single ended)

terminator plug to ensure that the device will operate at its

maximum speed. If you use a different kind of terminator

plug, the data I/O rate will decrease.

■

By default, termination on the Adaptec SCSI Card 29160 itself

is set to Automatic (the preferred method). We recommend that

you do not change this default setting.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

Brak uwag

Adaptec 29160LP - SCSI Card Storage Controller U160 160 MBps Przewodnik Instalacji Strona 10